Toshiba Magnia 3310 User Manual
Page 172
System Configuration Setup
BIOS setup utility
154
BASE I/O address
Set the I/O port address of the parallel port.
Interrupt
Set the interrupt number of the parallel port.
DMA channel
Set the DMA channel number of the parallel port.
Floppy disk controller
: Enabled
Set whether the built-in floppy disk controller is to be enabled
or disabled; select “Enabled.”
On Board Device
Onboard SCSI
: Enabled
Make the settings of the onboard SCSI.
Onboard NIC1
: Enabled
Make the settings of the onboard LAN(Ether1).
Onboard NIC2
: Enabled
Make the settings of the onboard LAN(Ether2).
Onboard USB
: Enabled
Make the settings of the onboard USB.
Installed O/S
Specify the OS (operating system) installed on your system.
Specify “Win 2000/.NET” if Windows Server 2003/
Windows 2000 is installed on your system, or “Others” if
another operating system is installed.
Boot time Diagnostic Screen
Do not change the setting.
Reset Configuration Data
Do not change the setting.