Toshiba Magnia 3310 - Manual (Page 204)

Installing Software
Windows® 2000 Server
187
8 Insert the “Intel 1Gbps LAN Windows Server 2000 Driver”
floppy disk in the floppy disk drive, select “Have disk”. Spec-
ify A:\ as the directory then select “OK”.
9 Select “Intel(R) 82545EM Based Network Connection”, select
“Next”.
(After this, follow the instructions that appear on screen.)
10 Select “Ethernet Controller” that is displayed in the screen in
step 3 above and right click on it. Select “Properties” in the
menu that is displayed and Ether2 adapter's properties are dis-
played.
11 Do the settings for Ether2 Controller the same way as
described in steps 4 to 9 above. Select “Intel 100Mbps LAN
Windows Server 2000 Driver” for the network adapter.
12 Restart the system.
Other settings
1 Start Windows 2000, and log onto Windows 2000 as the
Administrator (or a user having equivalent rights).
2 If no network has been set up, set up the network.
3 If no TCP/IP has been set for the network, set it. Installing
SNMP service is performed in the “Control Panel” - “Add/
Remove Programs” - “Add/Remove Windows Components” -
“Management and Monitoring Tools”.
See “Windows 2000 Server User's Guide or Help” for details
of TCP/IP setting.
See “Windows 2000 Server User's Guide or Help” for details
of installation.
4 Install the SNMP Service in the network.
For installing the SNMP Service, use “Services,” which can be
opened by selecting “Control Panel,” “Add/Remove Pro-
grams”, “Add/Remove Windows Components”, “Manage-
ment and Monitoring Tools”of the Windows 2000 Server in
this order.
See “Windows 2000 Server User's Guide or Help” for details
of installation.