Toshiba Magnia 3310 - Manual (Page 173)

System Configuration Setup
BIOS setup utility
155
™ Large Disk Access Mode
Set the access mode for the large-capacity hard disk drive. Do
not change the setting.
™ PS/2 Mouse
Do not change the setting.
™ Summary screen
Specify whether to display information about the system con-
figuration on completion of the POST. Select “Disabled”.
™ Legacy USB Support
USB devices are recognized as Legacy devices, letting you use
a USB keyboard or mouse as a PS/2 keyboard or mouse. Select
“Disabled”.
™ PXE of NIC1 Support
Specify whether to enable (Enabled) or disable (Disabled)
PXE (Pre-boot eXecution Environment) at onboard LAN
(Ether1 side).
™ PXE of NIC2 Support
Specify whether to enable (Enabled) or disable (Disabled)
PXE (Pre-boot eXecution Environment) at onboard LAN
(Ether2 side).
NOTE: PXE of NIC1 Support and PXE of NIC2 Support can-
not be enabled at the same time.
™ Hyper-Threading
To enable the processor's Hyper-Threading function, select
“Enabled”. To disable the function, select “Disabled”.