Toshiba Magnia 3310 - Manual (Page 175)

System Configuration Setup
BIOS setup utility
157
•Off: The system does not start up.
™ Wake-On-LAN
To enable the “Wake On LAN” function, select “Enabled“. To
disable the function, select “Disabled“.
NOTE: To use "Wake On LAN" function, you must enable this
option.
See “Turning on the server by the “Wake On LAN” function”
on page 41.
™ Terminate PEF Action
On completion of the BIOS Setup Utility, specify enable/dis-
able BMC operation.
™ Post Error Halt
When an error is detected by POST, specify whether to enable/
disable booting.
™ FRB2 Policy
Do not change the setting.
Security menu
All are recommended settings (defaults).
™ Set User Password
Allows User Password to be registered, changed, and/or
deleted. The user password can be set only when a supervisor
password is already defined. The entry of password is always
required to start the BIOS Setup Utility or to start the operating
system.
Set User Password [Enter]
Set Supervisor Password [Enter]
Password on boot: [Enabled]
Diskette access: [User]