JLG X14J Operator Manual User Manual
Page 107
•
Fluid that leaks under pressure may penetrate the skin. Always discharge pressure befo‑
re removing the hydraulic hoses and tighten connections correctly before pressurising.
Keep hands and body away from small holes and nozzles where high‑pressure liquids
may be released. Use cardboard or paper to identify leaks.
Heavy parts must be lifted using a lifting device with suitable capacity.
•
It is prohibited to carry out any maintenance operations with the working arm not com‑
pletely lowered and/or with stabilised machine.
•
If operations are being carried out, apply a visible sign on the start panel, stating “DAN‑
GER. Do not move the machine. Service in progress.”
7.6 M
ANOEUVRE OF THE MACHINE FROM THE SECOND EMERGENCY POSITION FROM THE GROUND
THROUGH THE OPTIONAL SECOND REMOTE CONTROL IN CASE OF MAINTENANCE OPERATIONS
This type of operation can be made only in case of maintenance operations of the machine
by expert personnel.
For the controls regarding the emergency position from the ground with second remote con‑
trol (option) please refer to the relevant paragraph.
‑
Turn the machine off, key on OFF.
‑
Insert the key in the control panel of the emergency position (rif. 2.6.6)
‑
Connect the optional second remote control following the procedure indicated in para‑
graph (check that the contacts of the connectors on the remote control and on the machi‑
ne are perfectly dry).
‑
Start the machine positioning the key on ON.
‑
Check the correct loading of the icons on the display of the optional second remote con‑
trol on the ground.
‑
Move the aerial part of the machine through the optional second remote control fol‑
lowing the instructions in paragraph regarding the use of the machine. In case the
basket is loaded with more than 50 kg, to use the emergency remote control on the
ground hold button 8 and operate the desired movement.
X14JR0420113
BOOM LIFT MODELS X14J
JLG
103
IMPORTANTE
IMPORTANT