JLG X14J Operator Manual - Manual (Page 13)

2. TECHNICAL INFORMATION
2.1. DESCRIPTION OF THE MACHINE
The JLG machine is a self‑propelled hydraulic lifting device, equipped with a rotating work
basket positioned at the top of an extendable articulated structure, which also rotates. The
JLG lifting device is destined for the POSITIONING OF PERSONS AND THEIR EQUIP‑
MENT AND MATERIALS IN HIGH POSITIONS WITH RESPECT TO GROUND LEVEL.
2.1.1 CONTROL POSITION
‑ CONTROL POSITION IN THE BASKET
The JLG overhead platform has been designed to be controlled by the operator in the basket
using a remote control, where all of the machine functional controls are gathered, positioned
in the relevant support inside the basket (see photo). A pedal button is also present in the
basket to allow movement of the aerial part (photo).From this control position it is possible
to control the extendible structure and machine stabilisation. When the machine is manoeu‑
vred from the control position in the basket, the remote control must be positioned in the
appropriate seat, and the footswitch must be pushed (the footswitch must be release and
pressed again if no movements are made for more of 7 second). The remote control is con‑
nected to the machine using a flexible cable that allows to shift it if the basket is to be remo‑
ved or the ground control unit is to be used.
Stabilisation of the machine must be preferably controlled from the basket drive position.
Machine traversing must be carried out from the control position on the ground.
After having reached or left the control position in the basket, ALWAYS remember to close
the ladder to avoid any damages during the use of the machine. After having left the con‑
trol position in the basket always remember to close the remote control protection cover.
ATTENZIONE
X14JR0420113
BOOM LIFT MODELS X14J
JLG
9
ATTENTION