JLG X14J Operator Manual User Manual
Page 53
POSITION 8:
Position 8 displays the battery charge status or the icon indicating the battery is being
recharged.
Position 8 is also used to show the selection of the emergency descent operation from the
basket with solenoid valves on the cylinders.
In addition to the main screen described above, there are other functional displays that
will be described successively.
4.1.2 Joysticks
Through the joystick the operator selects which movement has to be carried our, in which
direction and at which speed. The direction of the joystick defines the direction of the move‑
ment. The movement of the joystick defines the speed of the same. The more the joystick
goes away from the central neutral zone, the more the speed of the movements increases.
Starting on the left of the image shown below, the joysticks are numbered from 1 to 8.
The following table states the controlled movement and its direction depending on the acti‑
vation direction of the joystick.
Indicates that the angular position sensor doesn’t work correctly (only
for machine with variable area version).
The machine has a CANBUS line connection fault.
A faulty or incorrect electronic board (card) has been installed, or alter‑
natively an incorrect software version has been loaded.
X14JR0420113
BOOM LIFT MODELS X14J
JLG
49