JLG X14J Operator Manual - Manual (Page 14)

X14JR0420113 10
BOOM LIFT MODELS X14J
JLG
CONTROL POSITION ON THE GROUND:
There is a second control position for the track part. This position is not fixed but is located
on the ground within a radius equal to 2.5m from the basket attachment. To control the
machine, use the same remote control present in the basket, which is withdrawn from its
seat and moved away from the basket using the free cable length available.
This control position IS NOT enabled to control the aerial part of the
machine, but only the trailers, outriggers and track widening.
ATTENTION: when controlling the machine from the ground position keep
at a distance of at least 1m from the tracks.
ATTENTION: when the machine is controlled from the ground position
always check there is complete visibility of the component that is
to be moved and its trajectory for the entire duration of the movement.
‑ EMERGENCY CONTROL POSITION
There is a control position that will be identified as the emergency control position. It is on
the part of the machine on the ground in correspondence with the aerial part distributor. To
enable, act on the relevant selector switch at the base of the turret (see photo) until the green
indicator switches on. This indicates movement enabling of the aerial part.
From here it is possible to make machine movements by acting directly on the levers present
on the various hydraulic distributor elements, aerial (see photo 1) and proportional areas
(aerial part see photo 2).
The emergency control position has been designed, to operate on the extendible structure
only for emergency manoeuvres by rescue staff on the ground, which must be trained and
have know‑how regarding the functioning of the machine and its safety devices, for
maintenance interventions and to perform checks before starting work.
It is prohibited to move the structure from the ground position, if someone is present in
the basket, unless it is an emergency situation (sudden indisposition of the operator, tech‑
nical breakdown).
THERMIC MOTOR LITHIUM MOTOR
ATTENZIONE
ATTENTION