JLG X14J Operator Manual - Manual (Page 51)

POSITION 5:
Position 5 displays the icon confirming that aerial movements are enabled.
This icon means that all conditions for using the overhead movements have been checked
and the aerial part can be lifted. No icon on means that the aerial part cannot be lifted.
In place of this icon, the basket overload icon may be shown.
When the load sensor measures a load exceeding the allowed work load ‑ 120 kg/200 kg ‑ the
main screen disappears for three seconds, replaced by the overload error display, the audible
warning is activated, then the overload icon appears in position 5 in place of the icon ena‑
bling the aerial movements.
OVERLOAD ERROR DISPLAY
X14JR0420113
BOOM LIFT MODELS X14J
JLG
47