JLG X14J Operator Manual User Manual
Page 9
Note: All of the photos and drawings in this manual have been added to simplify com‑
prehension by the reader. Your machine may differ from the photos and drawings provi‑
ded.
NORMATIVE REFERENCES
The machine has been designed, built and inspected according to that prescribed in the
EN280 prA2:2009 harmonised standard, which supplies the presumption of conformity with
the Essential Safety Requisites of the 2006/42/CE Machinery Directive even if a type C Volun‑
tary Technical Standard.
According to that stated in EN280 prA2, the JLG platform is classified in GROUP B, as the
vertical projection of the centre of gravity of the load can be outside of the tilting lines and in
TYPE 1 as traversing is only allowed with the platform at rest.
The stability tests of the machine have been made in accordance with what described in
paragraph 6.1.4.2 of the EN280 with load test calculated in conformity with 5.2.4 and have
been successful.
In addition what prescribed in this manual it is necessary to apply the technical requirements of
the following national/international safety standards:
‑ UNI ISO 18893
‑ ISO 16368
‑ ISO 18878
With the exception of stricter local or national regulations in the working area of the MEWP.
WARRANTY
On purchasing a JLG platform, a warranty and inspection certificate is issued that clearly
indicates the warranty terms and where any interventions on the machine must be reported.
LIABILITY
The Constructor is exonerated from any liability and obligation for any injury/damage cau‑
sed to persons/objects due to any of the reasons listed below:
• Failure to comply with the instructions indicated in this USE AND MAINTENANCE
MANUAL regarding running, use and maintenance of the machine;
•
Violent or sudden actions or incorrect manoeuvres when using or servicing the machine;
• Modifications made to the structure or machine components without previous authori‑
sation from the Constructor and/or without the use of suitable equipment;
• Strange events with respect to normal and correct use of the machine, described in this
USE AND MAINTENANCE MANUAL.
•
Use of non‑original spare parts not authorised by the manufacturer.
X14JR0420113
BOOM LIFT MODELS X14J
JLG
5