JLG X14J Operator Manual User Manual
Page 89
‑
If necessary, start the engine using the corresponding button..
‑
Rotate the key selector in a clockwise direction and keep in position
‑
Check that the green indicator light on the emergency position control panel is on, i.e.
that the conditions are present to be able to move the aerial part.
‑
Move the aerial part of the machine using the manual levers positioned on the distri‑
butor on the ground as described on the sticker placed near them and as specified in
this manual.
‑
Reclose the protection and put both the keys away in their original positions.
6.5.3 E
MERGENCY DESCENT IN THE CASE WHERE THE STABILISERS ARE ACCIDENTALLY RETRACTED
While it is recommended to follow the instructions provided in the paragraph on stabilising
the machine, for various reasons one of the stabilisers may lose contact with the ground, thus
changing the angle of the machine or causing a foot plate to lift from the ground. If this
occurs when the machine is at a height, movements are stopped and disabled immediately.
To restore operation of the platform (close the aerial part and then stabilise the machine
again) the electrical emergency descent function can be used, which involves only the return
of the aerial part.
If this is not possible due to the presence of objects that interfere with the operation, person‑
nel on the ground can allow the operator in the basket to close the machine.
The operators on the ground can bypass the machine’s safety devices and allow the operator
in the basket to close the machine or allow the manual operations as described in the pre‑
vious paragraphs, in order to bring the operator back to the ground.
Read the instructions provided below before performing the operation as it is potentially
dangerous for the operator in the basket.
Proceed as follows:
‑ Open the electrical components compartment.
‑ Position the emergency key on the electrical components compartment, removing it from
the side where this is lead‑sealed (see photo).
X14JR0420113
BOOM LIFT MODELS X14J
JLG
85
WARNING! DANGEROUS OPERATION