JLG X14J Operator Manual User Manual
Page 26
Only use dry detergents, in accordance with the manufacturer’s instructions. Never remove
covers, guards and the like.
‑ Clean the electrical system using a dry, non‑metallic brush and low pressure air.
• After cleaning
Dry the machine carefully before starting it again (for example using compressed air).
If, despite all the precautions, moisture has penetrated into the electric motor or other parts
of the electric system, these must be dried using compressed air to avoid the risk of short‑cir‑
cuits.
Preventing damage that may be caused by the machine during work
When the machine has been stabilised and work has started, never enter its operating area.
Always operate the controls slowly and smoothly and avoid reversing the movements sud‑
denly.
When operating outside of the basket, ALWAYS keep a MINIMUM distance of 1 METRE
from the machine.
BOOM LIFT MODELS X14J
JLG
22
X14JR0420113
ATTENZIONE
WARNING
IMPORTANTE
IMPORTANT