JLG X14J Operator Manual - Manual (Page 156)

11. CHECKS TO MAKE ON THE MACHINE AFTER REPAIRS
11.1 C
HECKING THE CORRECT FUNCTIONING OF CONTROLS
‑ Check from the ground that the controls smoothly activate the machine.
‑ For the correct functioning of controls, refer to the relating paragraph.
11.2 C
HECKING FUNCTIONING OF THE SAFETY DEVICES
Check that all safety devices function as stated in this manual.
BOOM LIFT MODELS X14J
JLG
152 X14JR0420113
CODE DESCRIPTION STATUS ACTION
253
Mains voltage higher
than maximum ope‑
rating range toleran‑
ce. Battery charger won’t start
charging until mains voltage
returns within normal opera‑
ting range.
Make sure mains voltage is
within correct operating
parameters.
244
Mains voltage lower
than maximum ope‑
rating range toleran‑
ce. Battery charger won’t start
charging until mains voltage
returns within normal opera‑
ting range.
Make sure mains voltage is
within correct operating
parameters.