JLG X14J Operator Manual - Manual (Page 73)

‑ If the operator attempts to start one of the two motors while the other is already run‑
ning, starting will be impossible and the icon showing the motor already on will appear
at the centre.
‑ Use the button on the remote control to start the motor.
THE ENGINE MUST BE STARTED WITH ALL THE CONTROL BUTTONS AND JOY‑
STICKS IN NEUTRAL POSITION.
Always make sure there are no foreign objects (e.g. branches) that may accidentally operate a
control, as the platform may move suddenly out of the operator’s control and cause serious
harm to things and/or people.
Make sure that all the manual controls for the proportional valves are at rest.
6.4.4 S TOPPING THE ENGINE / MOTOR
To stop the engine, press again button 11 on the radio control; it allows the engine to be swit‑
ched off or on depending on its status.
To stop the electric motor, press button 12; it allows the electric motor to be switched off or
on depending on its status.
6.4.5 S TOPPING THE MOTOR LITHIUM VERSION
To switch off the electric motor, release the button or the lever on the remote control or relea‑
se the emergency control key.
The motor will stop automatically in 3‑4 seconds.
X14JR0420113
BOOM LIFT MODELS X14J
JLG
69