2N PRI Gateways - User Manual User Manual
Page 38
Advertising
36
7.6.3. VoIP Board Configuration (Web Interface)
While configuring the system using the web interface keep the default values of the following
parameters.
Trunk configuration:
Protocol type =
E1 TRANSPARENT 30
Clock master =
Recovered
Framing metod =
SUPERFRAME
Line code =
HDB3
Control protocol configuration:
Control protocol type =
MGCP
Call agent IP = IP address of CPU card (default 10.1.10.15)
Call agent port =
5060
Profile =
NORMAL
!!! PLEASE MAKE CHANGE ONLY IP CONFIGURATION PARAMETERS AND CALL AGENT
IP ADDRESS. CHANGING THE OTHERS PARAMETERS MAY CAUSE BAD FUNCTION OF
THE VOIP BOARD !!!
Advertising