2N PRI Gateways - User Manual - Manual (Page 49)

!! Preliminary version of user guide v1.8 !!
!! Preliminary version of user guide v1.8 !!
47
8.3. Configuration of Voice Callback Center software
8.3.1. How to add new user
In the Voice Callback center you can add as many users as the XAPI license enables.
For each user you have to set CLIP (identification of user phone) and name of this user. You
have to set also for each user amount of credit (tariff) for each group (destination). Automatic
restoring of credit may be activated/deactivated in the settings section. In case that you are
adding a lot of new users ,you can use tariff templates, which may be assigned to a new user.
This templates are defined in section “Tariffs Templates”.
As you can see an example in the picture, user Tom has a phone number +420605215677 and
credit rights for destination Group 1 only from midnight to noon. Credit for a month is 200
minutes. The user was created using template “Tariff 1”.
8.3.2. Tariffs templates
In this section you can prepare Customized tariffs. These
templates you can use for quicker adding of new users.
8.3.3. Groups
Tables of prefixes. Each Group contains real destinations
prefixes of calls (number which the customer dials by DTMF).
Each user can use only defined Group (destination prefixes).
The calls to PRI ISDN interface, which have prefixes restricted
by user settings or which are not defined in these tables will be
rejected !