2N PRI Gateways - User Manual - Manual (Page 88)

86
GSM group, 1-8= number of SIM holder)
AT%S98=xxxx PIN code for SIM cards inserted in the gateway
AT%S99=
dd.mm.yy.w/hh:mm:ss
Gateway date and time settings
AT%X00=hout,hin,min
Automatic logout of GSM modules
hout ...hour when the modules start to log out
randomly
hin ...hour when the modules start to log in
randomly
min ...minimal number of modules in the group
(2..15) which remains always logged in
AT%X80=name/pass User name/password for access via IP port (this
parameter is only write only- you can’t see its
value)
11.2.4. System
control
AT&Bxx=DOWN
Transfer of GSM board No. xx into the sleep
mode
AT&BPR=DOWN Transfer of PRI board into the sleep mode
AT&BALL=DOWN
Transfer of all GSM boards into the sleep mode
AT&Bxx=RESET Reset of GSM board No. xx
AT&BPR=RESET
Reset of PRI board
AT&BALL=RESET Reset of all GSM boards
AT&BSYS=RESET
Reset of PRIGW
AT&Gxx=RESET Reset of GSM module No xx
AT&Gxx=BLOCK Block of GSM module No xx
AT&Gxx=DOWN
Transfer of GSM module into the sleep mode
AT&Gxx=ON Transfer of GSM module into the idle mode
11.2.5. ISDN PRI Board Settings
AT%I00= ISDN PRI port type (TE/S ; TE/M ; NT/S ; NT/M)
AT%I01=x,y
X - TEI ISDN PRI connections (0-63)
Y – CRC (0=off, 1=on)
AT%I05=c1,c2,c3,c4
Number of causes sent to PRI ISDN (in the
ReleaseComplete) whenever an incoming call from PRI
ISDN is rejected.
AT%I11=
MSN for remote control via PRI1
AT%I12=
MSN for remote control via PRI2
AT%I04=x,y Channel select for PRI 1 / PRI 2
AT%I06=c1,c2,c3,c4
Progress messages
AT%i09=day,bits,enb Day- day of reset statistics
Bits – 0= no dialtone 1=continuous 3=discontinuous
Basic GSM settings
AT%G00=rr,gggggg,gggggg,gg
gggg,gggggg,gggggg
g,r=Number of GSM group for each GSM module
AT%G01=mode,atms,atfs
Voice processing settings (for GM22 GSM
modules only)
mode – algorithm (0-none, 1-semiduplex, 2-fullduplex)