2N PRI Gateways - User Manual - Manual (Page 62)

60
9.5. Setting Menu
Contains the communication and program language menus.
Communication
• Direct to COM port – Program communication through serial interface RS232
• Modem – Communication through connected modem.
• ISDN modem – Communication through ISDN modem and PRI card on PRI gateway
• TCP/IP – Communication through TELNET protocol through Ethernet.
• Transmission rate – the recommended and default value is 57.600bps.
9.5.1. Help Menu
Contains a help to the PRIGW program, instructions for use of the help and details on the
program version.
9.5.2. Button Bar
Select language
Program end
Run terminal
Upload configuration to the gateway
Load configuration from the gateway
Select gateway from list
Disconnect from the gateway
Conner with actual gateway
Save configuration to file
Open configuration from file