2N PRI Gateways - User Manual - Manual (Page 56)

54
GSM board – includes information on statuses and types of GSM modules on the GSM board.
-
Board type – type of GSM board
- Layer 2,3 – status of the module communication layers.
- GSM network – name of the network the module is currently logged in.
- Network ID – ID number of the network
(MCC+MNC) the module is currently logged in.
- GSM cell – identification number of the GSM cell the module is currently logged into. .
Description of displayed numbers:
NETCELL: A,BBB,CCC,DDDDD
A = status :
0 - not registered
1 - registered to home network
2 - not registered, but ME is searching for a new operator
3 - registration denied
4 - unknown
5 - registered to roaming network
BBB = first byte of LAC (location area code) in dec format
CCC = second byte of LAC in dec format
DDDDD = cell ID
- GSM group – number of actual GSM group.
-
Active SIM – Number of active SIM card on this GSM module.
-
Module ID - International identification number of the GSM module (IMEI).
-
Rev ID – GSM module firmware revision number.
-
SIM Number – SIM card serial number.
-
ID SIM card– International identification number (IMSI) or SIM serial number (SCID) of SIM
card.
-
Signal intensity – the current signal level in the network the module is logged in (minimum
value = -113 db – the module is logged out).
-
Sleep button – used for conversion of selected desk into sleep mode
-
Block button – block of selected GSM module (unavailable for outgoing and incoming
calls).
-
Down button – used for block the module after end of proceeding call
-
Reset button – hardware reset of board, or GSM module