2N PRI Gateways - User Manual - Manual (Page 44)

42
7.7. Configuration of 8HP VoIP board
The VoIP card is completely configured by PRIGW program trough CPU card of the gateway.
After any change in configuration of the VoIP card is complete system restart needed.
8. Configuration of Voice Callback Center software
This software is optional part of system. For additional information please contact 2N sales.
8.1. Scheme of function of Voice Callback
8.2. Installation and licenses
8.2.1. Communication settings of XAPI server
From attached CD, please run the file SETUP.EXE to launch the installation of XAPI server
software. After successful installation, please run it.
As a first thing, you have to setup the connection between your PRI ISDN GATEWAY and PC
(XAPI server).
Close all windows, except main XAPI server window. In main menu click to “Set” and “Module-
PBX”. In PBX settings you have to disable COM port by selecting “---“ and click OK.
PRIGW
PRIGW
PRIGW
User rings GSM
number of the gateway
Request for user
authorization
User authorized
Callback established
to the user
DTMF dialing in
(when user picks
up the call)
Request for destination
authorization
Destination authorized
Call is connected
according to the dialed
number and
authorization by VCC
RS232
LAN
PRI ISDN
Connection to
dialed number
1
2
6
4
5
3
7
8