AirLive SNMP-24MGB - Manual (Page 14)

2. Installing the SNMP-24MGB
7
AirLive SNMP-24MGB User’s Manual
2.5 Knowing your SNMP-24MGB
Below are descriptions and diagrams of the product:
2.6 Hardware Installation
Set the SNMP-24MGB on a sufficiently large flat space with a power outlet nearby. The
surface where you put your SNMP-24MGB should be clean, smooth, level and sturdy.
Make sure there is enough clearance around the SNMP-24MGB to allow attachment of
cables, power cord and allow air circulation.
2.6.1 Attaching Rubber Feet
A. Make sure mounting surface on the bottom of the SNMP-24MGB is grease and dust
free.
B. Remove adhesive backing from your Rubber Feet.
C. Apply the Rubber Feet to each corner on the bottom of the SNMP-24MGB. These
footpads can prevent the Switch from shock/vibration.