AirLive SNMP-24MGB - Manual (Page 253)

5. CLI Management in SNM-24MGB
AirLive SNMP-24MGB v2 User’s Manual 246
To set up the monitoring port of the mirror function. User can observe the packets that the
monitored port received via this port.
Argument
:
<range>: the monitoring port that is chosen for the mirror function. Only one port is
allowed to configure, available from 1 to 24
Possible value:
<range>:1 to 24
Example:
SNMP-24MGB(mirror)# set monitor-source 18
SNMP-24MGB(mirror)# show
Port to mirror to: 1
Port Source Enable Destination Enable
2 V
3 V
4 V
5 V
6 V
7 V
8 V
9 V
10 V
11 V
12 V
13 V
14 V
15 V
16
17
18 V
19
20
21