AirLive SNMP-24MGB - Manual (Page 69)

4. Web Management in SNMP-24MGB
AirLive SNMP-24MGB v2 User’s Manual 62
The mode here means the type of participant. There are two modes, normal
participant and non-participant, provided for the user’s choice.
Normal:
It is Normal Participant. In this mode, the switch participates normally in
GARP protocol exchanges. The default setting is Normal.
Non-Participant:
It is Non-Participant. In this mode, the switch does not send or reply any
GARP messages. It just listens messages and reacts for the received
GVRP BPDU.
Default Registrar Mode:
The mode here means the type of Registrar. There are three types of parameters
for registrar administrative control value, normal registrar, fixed registrar and
forbidden registrar, provided for the user’s choice.
Normal:
It is Normal Registration. The Registrar responds normally to incoming
GARP messages. The default setting is Normal.
Fixed:
It is Registration Fixed. The Registrar ignores all GARP messages, and
all members remain in the registered (IN) state.
Forbidden:
It is Registration Forbidden. The Registrar ignores all GARP messages,
and all members remain in the unregistered (EMPTY) state.
Restricted Mode:
This function is used to restrict dynamic VLAN be created when this port received
GVRP PDU. There are two modes, disable and enable, provided for the user’s
choice.
Disabled:
In this mode, the switch dynamic VLAN will be created when this port
received GVRP PDU. The default setting is Normal.
Enabled:
In this mode, the switch does not create dynamic VLAN when this port
received GVRP PDU. Except received dynamic VLAN message of the
GVRP PDU is an existed static VLAN in the switch, this port will be added
into the static VLAN members dynamically.
4.6.2 GVRP Counter