AirLive SNMP-24MGB - Manual (Page 198)

5. CLI Management in SNM-24MGB
191
AirLive SNMP-24MGB User’s Manual
Restoring ...
Restore Default Configuration Successfully
Press any key to reboot system.
restore user
Syntax:
restore user
Description:
To restore the startup configuration as user defined configuration. If restoring default
successfully, the CLI would prompt if reboot immediately or not. If you press Y or y, the
system would reboot immediately; others would back to the CLI system. After restoring
user-defined configuration, all the changes in the startup configuration would be lost. After
rebooting, the entire startup configuration would replace as user defined one.
Argument:
None.
Possible value:
None.
Example:
SNMP-24MGB # restore user
Restoring ...
Restore User Configuration Successfully
Press any key to reboot system.
save start
Syntax:
save start
Description:
To save the current configuration as the start one. When you enter this command, the CLI
would save your current configuration into the non-volatile FLASH. If you want the
configuration still works after rebooting, save the configuration using the command ‘save
stat’.
Argument: