AirLive SNMP-24MGB - Manual (Page 140)

4. Web Management in SNMP-24MGB
133
AirLive SNMP-24MGB User’s Manual
Only MultiHost 802.1X is the type of authentication supported in the switch. In this mode,
for the devices connected to this port, once a supplicant is authorized, the devices
connected to this port can access the network resource through this port.
802.1X Port-based Network Access Control function supported by the switch is little bit
complex, for it just support basic Multihost mode, which can distinguish the device’s MAC
address and its VID. The following table is the summary of the combination of the
authentication status and the port status versus the status of port mode, set in 802.1X Port
mode, port control state, set in 802.1X port setting. Here Entry Authorized means MAC
entry is authorized.
Port Mode Port Control Authentication Port Status
Disable Don’t Care Don’t Care Port Uncontrolled
Multihost Auto Successful Port Authorized
Multihost Auto Failure Port Unauthorized
Multihost ForceUnauthorized Don’t Care Port Unauthorized
Multihost ForceAuthorized Don’t Care Port Authorized
4.11.1 Server
Function name:
802.1X Server Configuration
Function description:
Access allowed
PC
LAN
Bridge
Radius Server
Access blocked
Port connect
Radius-Access-Challenge
Radius-Access-Accept
Radius-Access-Request
Radius-Access-Request
EAPOL-Start
EAP-Response/Identity
EAP-Response (cred)
EAP-Request/Identity
EAP-Request
EAP-Success
EAP-Failure
EAPOL EAP
Authenticator
Radius
EAP-Logoff