AirLive SNMP-24MGB - Manual (Page 225)

5. CLI Management in SNM-24MGB
AirLive SNMP-24MGB v2 User’s Manual 218
z gvrp
set state
Syntax :
set state < 0 | 1>
Description
:
To disable/ enable the gvrp function.
Argument :
0 : disable the gvrp function
1 : enable the gvrp function
Possible value:
0 : disable the gvrp function
1 : enable the gvrp function
Example:
SNMP-24MGB(gvrp)# set state 1
group applicant
Syntax:
group applicant <vid> <port> < 0 | 1>
Description
:
To enter any of gvrp group for changing gvrp group setting. You can change the applicant or
registrar mode of existing gvrp group per port.
Argument
:
<vid>: enter which gvrp group you had created, using value is vid. Available range: 1 to
4094
<port>: 1 to 24
< 0 | 1> :
Possible value:
<vid>: 1~4094