AirLive SNMP-24MGB - Manual (Page 192)

5. CLI Management in SNM-24MGB
185
AirLive SNMP-24MGB User’s Manual
5.3 Command of CLI
To see the commands of the mode, please input “?” after the prompt, then all commands
will be listed in the screen. All commands can be divided into two categories, including
global commands
and local commands. Global commands can be used wherever the
mode you are. They are “exit”, “end”, “help”, “history”, “logout”, “save start”, “save user”,
“restore default” and “restore user”. For more details, please refer to Section 5.3.1.
Command instructions reside in the corresponding modes are local commands. The
same command with the same command name may occur but perform totally different
function in different modes. For example, “show” in IP mode performs displaying the IP
information; however, it performs displaying the system information in system mode. For
more details, please refer to Section 4-2-2.