AirLive SNMP-24MGB - Manual (Page 273)

5. CLI Management in SNM-24MGB
AirLive SNMP-24MGB v2 User’s Manual 266
SNMP-24MGB(port)# show config
Speed/ Flow Maximum Excessive
Port Duplex Control Frame Collision Description a list of previously run command set
priority
---- --------- -------- ------- --------- --------------------------------DISCAR
2 Auto Disabled 9600 Discard
3 Auto Disabled 9600 Discard salesdepartment
4 Auto Disabled 9600 Discard salesdepartment
5 Auto Disabled 9600 Discard salesdepartment
6 Auto Disabled 9600 Restart salesdepartment
7 Auto Disabled 9600 Restart salesdepartment
8 Auto Disabled 9600 Restart salesdepartment
9 Auto Disabled 9600 Restart
10 Auto Disabled 9600 Restart
11 Auto Disabled 9600 Discard
set flow-control
Syntax
:
set flow-control <port-range> <enable|disable>
Description :
To set per-port flow control
Argument
:
<port-range>: syntax 1,5-7, available from 1 to 24
Possible value:
<port-range>: 1 ~ 24
Example:
SNMP-24MGB(port)# set flow-control 3-10
SNMP-24MGB(port)# show config
1 Auto Disabled 9600 Doscard
2 Auto Disabled 9600 Discard
3 Auto Enabled 9600 Discard salesdepartment
4 Auto Enabled 9600 Discard salesdepartment
5 Auto Enabled 9600 Discard salesdepartment