AirLive SNMP-24MGB - Manual (Page 18)

3. Configuring the SNMP-24MGB
11
AirLive SNMP-24MGB User’s Manual
The SNMP-24MGB offers many different types of management interface. You can
configure through web browser (http), console (terminal), CLI. In this chapter, we will
explain SNMP-24MGB’s available management interfaces and how to get into them.
Then, we will provide the introduction on Web Management and recommended initial
settings. For detail explanations on Web Management functions, please go to Chapter 4.
For Console interface, please go to Chapter 5.
3.1 Important Information
The following information will help you to get start quickly. However, we recommend you
to read through the entire manual before you start. Please note the username and
password are case sensitive.
‰ The default IP address is 192.168.1.1
‰ The default Subnet Mask is 255.255.255.0
‰ The default Gateway is 192.168.1.254
‰ The default username is admin
‰ The default password is airlive
3.2 Prepare your PC
The SNMP-24MGB can be managed remotely by a PC through RJ-45 cable. The default
IP address of the SNMP-24MGB is 192.168.1.1 with a subnet mask of 255.255.255.0.
This means the IP address of the PC should be in the range of 192.168.1.2 to
192.168.1.253.
To prepare your PC for management with the SNMP-24MGB, please do the following:
1.
Connect your PC directly to the copper port of SNMP-24MGB
2. Set your PC’s IP address manually to 192.168.1.100 (or other address in the same
subnet)
3
3.
Configuring the
SNMP-24MGB