Set speed – AirLive SNMP-24MGB User Manual
Page 275
5. CLI Management in SNM-24MGB
AirLive SNMP-24MGB v2 User’s Manual
268
10 Auto Enabled 9600 Restart
11 Auto Disabled 9600 Discard
set speed
Syntax
:
set speed <port-range> <disable|auto|1Gfull|100full|100half|10full|10half
Description
:
To set port capability.
Argument
:
<port-range>:syntax 1,5-7, available from 1 to 24
<port-speed>:
auto: set auto-negotiation mode
10half: set speed/duplex 10M Half
10full: set speed/duplex 10M Full
100half: set speed/duplex 100M Half
100full: set speed/duplex 100M Full
1Gfull: set speed/duplex 1G Full
Possible value:
<port-range>: 1 to 24
<port-speed>: auto, 10half, 10full, 100half, 100full, 1Gfull
Example:
SNMP-24MGB(port)# set speed 3 auto
SNMP-24MGB(port)# show status
Speed/
Port Link Duplex Rx Pause Tx Pause Description
---- ---- --------- -------- -------- --------------------------------
1 Up 100M/Full Disabled Disabled
2 Down Down Disabled Disabled
3 Up 100M/Full Disabled Disabled
4 Down Down Disabled Disabled
5 Down Down Disabled Disabled
6 Down Down Disabled Disabled