AirLive SNMP-24MGB - Manual (Page 94)

4. Web Management in SNMP-24MGB
87
AirLive SNMP-24MGB User’s Manual
Function name:
ACL Port Configuration
Function description:
The switch ACL function support up to 128 Access Control Entries (ACEs), using the
shared 128 ACEs for ingress classification. You can create an ACE and assign this
ACE for each port with <Any> or assign this ACE for a policy or assign this ACE for a
port. There are 8 policies, each port can select one of policy, then decides which of
the following actions would take according to the packet’s IPv4, EtherType, ARP
Protocol, MAC Parameters and VLAN parameters:
- Packet Deny or Permit
- Rate Limiter (Unit: pps)
- Port Copy (1 – 24)
Parameter description:
Port #:
Port number: 1~24
Policy ID:
Policy ID range: 1~8
Action:
Permit or Deny forwarding the met ACL packets
Rate Limiter ID:
Disabled: Disable Rate Limitation