AirLive SNMP-24MGB - Manual (Page 182)

4. Web Management in SNMP-24MGB
175
AirLive SNMP-24MGB User’s Manual
Parameter description:
MAC: To show the DHCP snooping client’s MAC address.
VID:
To show the DHCP snooping client’s VLAN ID.
Port:
To show the DHCP snooping client’s port.
IP:
To show the DHCP snooping client’s IP address.
Lease: To show the DHCP snooping client’s lease.
4.19 Save / Store
The switch supports three copies of configuration, including the default configuration,
working configuration and user configuration for your configuration management. All of
them are listed and described below respectively.
ƒ
Default Configuration:
This is ex-factory setting and cannot be altered. In Web UI, two restore default functions are
offered for the user to restore to the default setting of the switch. One is the function of
“Restore Default Configuration included default IP address”
, the IP address will restore to
default “192.168.1.1” as you use it. The other is the function of “Restore Default
Configuration without changing current IP address”
, the IP address will keep the same one
that you had saved before by performing this function.