AirLive SNMP-24MGB User Manual
Page 21
Advertising
3. Configuring the SNMP-24MGB
AirLive SNMP-24MGB v2 User’s Manual
14
use the telnet, please open the command line windows. Then type “telnet 192.168.1.1”
to start.
When asking for username and password, please enter “admin” as username and “airlive”
as password.
After you login successfully, the prompt will be shown as “#“ if you are the first login person
and your authorization is administrator; otherwise it may show “$“. See the following two
figures. The former means you behave as an administrator and have the access right of the
system. As to the latter, it means you behave as a guest and are only allowed to view the
system without the permission to do any setting for this switch.
Advertising