AirLive SNMP-24MGB - Manual (Page 16)

2. Installing the SNMP-24MGB
9
AirLive SNMP-24MGB User’s Manual
Note:
For proper ventilation, allow about at least 4 inches (10 cm) of clearance on the
front and 3.4 inches (8 cm) on the back of the Switch. This is especially important for
enclosed rack installation.
2.6.3 Power On
Connect the power cord to the power socket on the rear panel of the SNMP-24MGB. The
other side of power cord connects to the power outlet. The internal power supply of the
SNMP-24MGB works with voltage range of AC in the 100-240VAC, frequency 50~60Hz.
Check the power indicator on the front panel to see if power is properly supplied.
2.7 LED Table
The LED Indicators gives real-time information of systematic operation status. The
following table provides descriptions of LED status and their meaning.