AirLive SNMP-24MGB - Manual (Page 37)

4. Web Management in SNMP-24MGB
AirLive SNMP-24MGB v2 User’s Manual 30
the mode, users can be classified into two types: Those who are able to connect to the
switch (Accept) and those who are unable to connect to the switch (Deny). Some
restrictions also can be placed on the mode that the user connect to the switch, for
example, we can decide that which VLAN VID is able to be accepted or denied by the
switch, the IP range of the user could be accepted or denied by the switch, the port that
the user is allowed or not allowed to connect with the switch, or the way of controlling
and connecting to the switch via Http, Telnet or SNMP.
Add:
A new entry of Management Security Configuration can be created after the
parameters as mentioned above had been setup and then press <Add> button.
The existed entry also can be modified by pressing this button.
Delete:
Remove the existed entry of Management Security Configuration from the
management security table.
Name:
A name is composed of any letter (A-Z, a-z) and digit (0-9) with maximal 8
characters.
IP Range:
The switch supports two kinds of options for managed valid IP Range, including
“Any” and “Custom”. Default is “Any”. In case that ”Custom” is chosen, you can
assigned effective IP range. The valid range is 0.0.0.0~255.255.255.255.