Show, Zstp – AirLive SNMP-24MGB User Manual
Page 293
5. CLI Management in SNM-24MGB
AirLive SNMP-24MGB v2 User’s Manual
286
show
Syntax
:
show
Description
:
The Show here is to display the configuration of SNMP.
Argument
:
None.
Possible value:
None.
Example:
SNMP-24MGB(snmp)# show
SNMP : Enable
Get Community: public
Set Community: private [Enable]
Trap Host 1 IP Address: 192.168.1.1 Port: 162 Community: public
Trap Host 2 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 3 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 4 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 5 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 6 IP Address: 0.0.0.0 Port: 162 Community: public
z
stp
MCheck
Syntax
:
MCheck <range>
Description
:
To force the port to transmit RST BPDUs.
Argument
:
<range>: syntax 1,5-7, available from 1 to 24
Possible value:
<range>: 1 to 24