AirLive SNMP-24MGB - Manual (Page 162)

4. Web Management in SNMP-24MGB
155
AirLive SNMP-24MGB User’s Manual
MAX. Hops:
6-40sec. It’s a new parameter for the multiple spanning tree protocol. It is used in
the internal spanning tree instances. “CIST Remaining Hops” or “MSTI Remaining
Hops” in the Spanning tree protocol message would decreased by one when the
message is propagated to the neighboring bridge. If the Remaining Hops in a
message is zero, the message (BPDU) would be regarded as invalid. Max Hops is
used to specify the initial value of the Remaining Hops for Regional Root Bridge
(Either CIST Regional Root or MSTI Regional Root)
Parameter description:
Port:
1-24
Path Cost:
1 – 200,000,000
The same definition as in the RSTP specification. But in MSTP, this parameter can
be respectively applied to ports of CIST and ports of any MSTI.
Priority:
0 / 16 / 32 / 48 / 64 / 80 / 96 / 112 / 128 / 144 / 160 / 176 / 192 / 208 / 224 / 240
The same definition as in the RSTP specification. But in MSTP, this parameter can
be respectively applied to ports of CIST and ports of any MSTI.
Hello Time: ( 1 / 2)
In contrast with RSTP, Hello Time in MSTP is a per port setting for the CIST.
Admin Edge: (Yes / No)