AirLive SNMP-24MGB - Manual (Page 150)

4. Web Management in SNMP-24MGB
143
AirLive SNMP-24MGB User’s Manual
Parameter description:
Aggregator:
It shows the aggregator ID (from 1 to 24) of every port. In fact, every port is also an
aggregator, and its own aggregator ID is the same as its own Port No.
Method:
Show the method a port uses to aggregate with other ports.
Member Ports:
Show all member ports of an aggregator (port).
Ready Ports:
Show only the ready member ports within an aggregator (port).
4.12.3 LACP system Priority
Function name:
LACP System Priority
Function description:
It is used to set the priority part of the LACP system ID. LACP will only aggregate