AirLive SNMP-24MGB - Manual (Page 49)

4. Web Management in SNMP-24MGB
AirLive SNMP-24MGB v2 User’s Manual 42
4.3.4 Detail Counter
The function of Detail Counter collects any information and provides the counting about the
traffic of the port, no matter the packet is good or bad.
In below figure, the window can show only one port counter information at the same time.
To see another port’s counter, you have to pull down the list of Select, then you will see the
figures displayed about the port you had chosen.
Each data field has 20-digit long. If the counting is overflow, the counter will be reset and
restart counting. The data is updated every time interval defined by the user. The valid
range is 3 to 10 seconds. The Refresh Interval is used to set the update frequency. Default
update time is 3 seconds.
Function name:
Detail Counter
Function description:
Display the detailed counting number of each port’s traffic. The window can show all
counter information of each port at one time.
Parameter description:
Rx Packets:
The counting number of the packet received.
RX Octets:
Total received bytes.