Mounting steps – Lenze ECSEExxx User Manual
Page 75
Advertising
Mechanical installation
Mounting with fixing rails (standard installation)
Mounting steps
3
75
EDKCSEE040 DE/EN/FR 4.0
3.2.2
Mounting steps
Proceed as follows to mount the power supply module:
1. Prepare the fixing holes on the mounting surface.
–
Use the drilling jig for this purpose.
2. Take the fixing rails from the accessory kit in the cardboard box.
3. Push the rails into the slots of the heatsink:
–
From above: push in the long side.
–
From below: push in the short side.
4. Attach the power supply module to the mounting surface.
Advertising