Assembly instructions, K 8/0 – Northern Connectors Harting HAN Industrial Rectangular Connectors User Manual
Page 137
Advertising
05.
25
Han
Com
Assembly instructions
Han
®
K 8/0
Description
Depiction
Dimensions in mm
Step 1:
Strip insulation from the wire with a length
given on page 05.20 and insert the wire into
the contact chamber until insulation is flush
with contact.
Do not twist the strands of the wire.
L: Stripping length for power contacts
Step 2:
Hold the wire in position and tighten by a
hexagonal driver (SW 4) from the mating side
with a tightening torque given on page 05.20.
Step 3:
Complete connection
The male insert is shown. The same method is applicable for female inserts.
Advertising