Tools, For contacts – Northern Connectors Harting HAN Industrial Rectangular Connectors User Manual
Page 498
99
.
10
"https://b2b.harting.com/ebusiness/en/
"https://b2b.harting.com/ebusiness/en/
Tools
Tools
for contacts
Han
®
C
(09 32 ...)
Identification
Part number
Drawing
Dimensions in mm
Stock items in bold type
Removal tool for crimp contacts
A removal tool is necessary to remove the contacts. For each
„C“ contact cavity, the location of the internal locking levers are
marked on the wiring side with two black arcs. The sides of the
tool must be first properly aligned so that the edges of the tool
engage both levers simultaneously and then inserted until a stop
is noticeable ➀. Once it has been inserted, the tool must not be
turned. The wire together with the tool can then be pulled out
from the wiring side of the insert ➁.
a ... lever marking
Removal tool
1.5 ... 6 mm²
10 mm²