Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 493)

99.
05
"https://b2b.harting.com/ebusiness/en/
09 99 000 0059
"
"https://b2b.harting.com/ebusiness/en/
09 99 000 0367
"
"https://b2b.harting.com/ebusiness/en/
09 99 000 0319
"
Tools
Tools
for contacts
Han E ®
(09 33 ...)
Identification Part number Drawing Dimensions in mm
Stock items in bold type
Insertion tool for crimp contacts
For crimp contacts with wires of less than 0.75 mm² it is re-
commended that an insertion tool is used. Contacts should be
inserted from the wiring side and pushed down until a positive
locking is achieved.
Insertion tool for Han ® ES inserts
Removal tool for crimp contacts
for Han ® EE, Han ® Q 5/0, Han ® Q 8/0,
Han E ® , Han-Yellock ® and Han A ®
A removal tool is necessary if contacts are to be replaced in the
insert. The tool is inserted from the wiring side until a stop is
noticeable. The wire with the crimp contact can then be pulled out
from the same side of the insert.