Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 277)

15
.
12
Power
Distribution
Han-Power ® S with 1x Han ® Q 8/0
Features
• 6 IDCs + PE for 2.5 mm² up to 6 mm² wire gauge
• No interuption of the energy supply
• Space-saving and compact design
• Leading protective ground within the insert
• Assembly with standard tools
Description
The Han-Power ® S connector is suitable for the assembly of
serial power bus. Having assembled the energy supply Han-
Power ® S can be inserted at any place of the power cable.
The cable jacket has to be removed, the conductor is placed
without interruption in the IDC.
Han-Power ® S is suitable for cables with single strands manuf-
actured acc. to DIN VDE 0281/ DIN EN 60 228 with wire gau-
ges of 2.5 mm² up to 6 mm². For the distribution of the device
Han-Compact ® hoods or cable to cable housings are used.
This power supply has to be realized with one Han-Compact ®
cable to cable hood.
Current carrying capacity
The current carrying capacity of the connectors is limited by the
thermal load capability of the contact element material including
the connections and the insulating parts. The derating curve
is therefore valid for currents which flow constantly (non-inter-
mittent) through each contact element of the connector evenly,
without exceeding the allowed maximum temperature.
Measuring and testing techniques according to
DIN EN 60 512-5-2
Operating
current
Ambient temperature
➀ Han ® Q 8/0 Wire gauge: 2.5 mm²
➁ Han ® Q 8/0 Wire gauge: 4 mm²
➁ Han ® Q 8/0 Wire gauge: 6 mm²
Han ® Q 8/0 partly loaded
with wire gauge 7x 4 mm²
Technical characteristics
Specifications DIN EN 61 984
DIN EN 60 664-1
Han-Power ® S
Number of contacts
- Power contacts 6 + PE
Electrical data
acc. to EN 61 984 25 A 500 V 6 kV 3
Rated current 25 A
Rated voltage 500 V
Rated impulse voltage 6 kV
Pollution degree 3
Rated voltage
acc. to UL/CSA 600 V
Insulation resistance ≥ 10 10 kΩ
Material polycarbonate
Limiting temperatures -40 °C ... +125 °C
Flammability acc. to UL 94 V 0
Mechanical working life
- mating cycles ≥ 500
Degree of protection acc. to DIN EN 60 529 IP 65
Contacts
Material copper alloy
Surface
- hard-silver plated 3 µm Ag
Contact resistance ≤ 1 mΩ
Crimp terminal
- mm² 2.5 ... 6 mm²
- AWG 14 ... 10
Cables
Design of conductor acc. to DIN VDE 0281
DIN EN 60 228
Single strand
Wire gauge 2.5 mm²
- Number of single strands 50 x 0.25 mm ∅
- Outer diameter 3.6 mm
Wire gauge 4 mm²
- Number of single strands 56 x 0.3 mm ∅
- Outer diameter 4.2 mm
Wire gauge 6 mm²
- Number of single strands 84 x 0.3 mm ∅
- Outer diameter 4.8 mm