Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 466)

95
.
04
Accessories
Han ® Split Hood
Features
• Compatible with Han ® housings, bulkhead moun-
ting, with 2 levers, standard panel cut out
• Allows the entry of pre-assembled cables into a
switch cabinet
• Use of identification strips is possible
• No special tools required for assembly
• Standard screw driver (5 x 1 mm) necessary to
open split hood
Technical characteristics
Split Hood
Material polycarbonate
Flammability acc. to UL 94 V 0
Limiting temperatures -40 °C ... +125 °C
Cable entries 3, 4
Degree of protection
in locked position
with correct grommet
IP 54 when mounted
vertically in the longitudinal
direction
Max. cable diameter 3 ... 16
Locking cycles of bulkhead
mounted housings ≥ 50
Locking cycles
of splitt hood halves ≥ 10
Cable entry glands
Material
Thermoplastic rubber,
UL listed
Limiting temperatures -40 °C ... +125 °C
Colour black