Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 47)

Han
D / DD
02.
03
Han ® 8 D Technical characteristics
Features
• High density of crimping contacts, up to 8 contacts /
connector
• Time saving rapid termination by use of crimping
contacts
• For requirements up to ∼ 50 V / — 120 V / 10 A
• Gold and silver contacts available
• Suitable for thermo- and 1 mm F.O. contacts
Specifications DIN EN 60 664-1
DIN EN 61 984
DIN EN 175 301-801
Approvals ,
Inserts
Number of contacts 8
Electrical data
acc. to EN 61 984 10 A ~50 V / – 120 V 0.8 kV 3
Rated current 10 A
Rated voltage ~ 50 V
Rated voltage DC – 120 V
Rated impulse voltage 0.8 kV
Pollution degree 3
Rated voltage
acc. to UL/CSA 50 V
Rated voltage
(direct voltage) 120 V
Insulation resistance ≥ 10 10 Ω
Material polyamide
Limiting temperatures -40 °C ... +125 °C
Flammability acc. to UL 94 HB
Mechanical working life
- mating cycles ≥ 500
Contacts
Material copper alloy
Surface - hard-gold plated 2 µm Au over 3 µm Ni
Surface - hard-silver plated 3 µm Ag
Contact resistance ≤ 3 mΩ
Crimp terminal - min 0.14 mm² / AWG 26
Crimp terminal - max 2.5 mm² / AWG 14
Han-Quick Lock ® - min 0.25 mm² / AWG 24
Han-Quick Lock ® - max 1.5 mm² / AWG 16
Hoods/Housings Han ® 3 A
Thermoplastic
Material polycarbonate
Surface RAL 7032 (light grey)
RAL 9005 (black)
Locking element lever, plastic
Flammability acc. to UL 94 V 0
Hoods/Housings seal NBR
Limiting temperatures -40 °C ... +125 °C
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 65 / IP 67
Metal
Material zinc die-cast
Surface powder coated
RAL 7037 (grey)
Locking element lever, metal
Flammability acc. to UL 94 V 0
Hoods/Housings seal NBR
Limiting temperatures -40 °C ... +125 °C
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 44
IP 67 is achieved with seal
screw
"https://b2b.harting.com/ebusiness/en/
09 20 000 9918
"
Accessories
Crimping tools chapter 99
Cable clamps chapter 95
Coding of hoods/housings chapter 95
Label acc. to CSA-approval chapter 95
Han-Snap ® chapter 11
Assembly plates for test connector chapter 95