Tools, Han d, For contacts – Northern Connectors Harting HAN Industrial Rectangular Connectors User Manual
Page 491
99.
03
Tools
Tools
for contacts
Han D
®
(09 15 ...)
Identification
Part number
Drawing
Dimensions in mm
Stock items in bold type
Insertion tool for crimp contacts
For crimp contacts with wires of less than 0.75 mm² it is re-
commended that an insertion tool is used. Contacts should be
inserted from the wiring side and pushed down until a positive
locking is achieved.
Removal tool for crimp contacts
Removal tool
Replacement-tip for removal tool
Removal tool
A removal tool is necessary if contacts are to be replaced in the
insert. It is inserted from the mating face and pushed over the
contact until a stop is noticeable. Additional pressure unlocks the
contact and pushes it out of the wiring side. In case of the remo-
val tool (. . 0052) the unlocking process is achieved by pressure
on the central rod.