Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 215)

Han
Q
13
.
26
Features
• Field assembly without special tools - reduced
wiring times
• Compatible with Han ® Q 4/2 standard inserts with
crimp terminations
• Space-saving and compact design
• Inserts suitable for standard plastic and metal
hoods/housings with additional PE contact from
the Han-Compact ® size
• With or without Han-Quick Lock ® signal contacts
as an option
Attention
• For termination please use only hexagonal screw driver with
wrench size SW 2.
• If PE contact is not used:
Please screw the PE contact maximal on both sides clockwise
with a hexagonal screwdriver, wrench size SW 2.
Current carrying capacity
The current carrying capacity of the connectors is limited by the
thermal load capability of the contact element material including
the connections and the insulating parts. The derating curve
is therefore valid for currents which flow constantly (non-inter-
mittent) through each contact element of the connector evenly,
without exceeding the allowed maximum temperature.
Measuring and testing techniques according to
DIN EN 60 512-5
Operating current
Ambient temperature
Wire gauge: ➀ 4 mm²
➁ 6 mm²
Technical characteristics
Specifications DIN EN 60 664-1
DIN EN 61 984
Inserts
Number of contacts 4 / 2 + PE
Electrical data
acc. to EN 61 984
Power side 40 A 400/690 V 6 kV 3
Rated current 40 A
Rated voltage conductor - ground 400 V
Rated voltage conductor - conductor 690 V
Rated impulse voltage 6 kV
Pollution degree 3
Signal side 10 A 250 V 4 kV 3
Rated current 10 A
Rated voltage 250 V
Rated impulse voltage 4 kV
Pollution degree 3
Insulation resistance ≥ 10 10 Ω
Material polycarbonate
Limiting temperatures -40 °C ... 125 °C
Flammability acc. to UL 94 V 0
Mechanical working life
- mating cycles ≥ 500
Contacts
Material copper alloy
Surface
- hard-silver plated 3 µm Ag
Power contacts
Contact resistance ≤ 0.3 mΩ
Axial screw termination
- mm² 4 ... 10 mm²
- AWG 12 ... 8
Max. insulation diameter 7.3 mm
Stripping length 8 mm
Tightening torque 1.8 Nm
Signal contacts
Contact resistance ≤ 3 mΩ
Han-Quick Lock ®
- mm² 0.25 ... 1.5 mm²
- AWG 23 ... 16
Max. insulation diameter 3 mm
Stripping length 10 mm
Hoods/Housings
Plastic hoods/housings
Material thermoplastic
Locking element Polyamide
Hoods/Housings seal NBR
Limiting temperatures -40 °C ... 125 °C
Flammability acc. to UL 94 V 0
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 65
Hoods/Housings, metal,
with additional PE contact
Material metal
Locking element Stainless steel
Hoods/Housings seal NBR
Limiting temperatures -40 °C ... 125 °C
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 65
Han ® Q 4/2 Axial screw