Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 46)

Han
D / DD
02
.
02
Han D ® Technical characteristics
Features
• High density of crimping contacts, up to 128
contacts / connector
• Time saving rapid termination by use of crimping
contacts
• For requirements up to 250 V / 10 A
• Gold and silver contacts available
• Suitable for thermo- and 1 mm F.O. contacts
Specifications DIN EN 175 301-801
DIN EN 60 664-1
DIN EN 61 984
Approvals , ,
Inserts
Number of contacts 7, 15, 25, 40, 50, 64, 80, 128,
50 (2x 25), 80 (2x 40),
128 (2x 64) + PE
Electrical data
acc. to EN 61 984 10 A 250 V 4 kV 3
Rated current 10 A
Rated voltage 250 V
Rated impulse voltage 4 kV
Pollution degree 3
Pollution degree 2 also 10 A 230/400 V 4 kV 2
– for wrap terminal only 10 A 250 V 4 kV 2
Rated voltage
acc. to UL/CSA 600 V
Rated voltage
for wrap terminal acc. to CSA 2 A 30 V
Contact arrangement for higher voltage see page 02.22
Insulation resistance ≥ 10 10 Ω
Material polyamide
- Han ® 40 D/Han ® 64 D polycarbonate
Limiting temperatures -40 °C ... +125 °C
Flammability acc. to UL 94 HB
- Han ® 40 D/Han ® 64 D V 0
Mechanical working life
- mating cycles ≥ 500
Contacts
Material copper alloy
Surface - hard-gold plated 2 µm Au over 3 µm Ni
Surface - hard-silver plated 3 µm Ag
Contact resistance ≤ 3 mΩ
Crimp terminal - min 0.14 mm² / AWG 26
Crimp terminal - max 2.5 mm² / AWG 14
Wire wrap terminal 1 x 1 mm - length 22 mm
Diagonal 1.34 - 1.45 mm Contact
spacing 5.08 mm (40 + 64 poles)
Contact spacing 5.3 mm (15 +
25 poles)
Han-Quick Lock ® - min 0.25 mm² / AWG 24
Han-Quick Lock ® - max 1.5 mm² / AWG 16
Hoods/Housings
Material aluminium die-cast
Surface powder coated
RAL 7037 (grey)
Locking element Han-Easy Lock ®
Flammability acc. to UL 94 V 0
Hoods/Housings seal NBR
Limiting temperatures -40 °C ... +125 °C
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 65
Variants for Han ® 3 A housings (see page 02.03)
Material polycarbonate
RAL 7032 (light grey)
Locking element Polyamide
RAL 7032 (light grey)
Accessories
Crimping tools chapter 99
Cable clamps chapter 95
Coding of hoods/housings chapter 95
Label acc. to CSA-approval chapter 95
Han-Snap ® chapter 11
Assembly plates for test connector chapter 95
ATTENTION!
Guide pins and bushes are prescribed for the following
connectors: 15, 25, 40, 50, 64, 80 and 128 poles
(see chapter 95).