Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 36)

Han
A
01
.
02
Technical characteri-
stics Han A ®
Han A ® Technical characteristics
Features
• Metal and plastic version available
• Han ® 3 A hoods/housings metal and plastic version
available
• Han ® 3 A / 4 A inserts also with Han-Quick Lock ®
termination technology available
• Han ® 10 A and 16 A inserts available in crimp and
screw termination
• For currents up to 10 A ( Han ® 3 A / Han ® 4 A) and
16 A (Han ® 10 A / Han ® 16 A )
Specifications
DIN EN 60 664-1
DIN EN 61 984
Approvals , ,
Inserts
Number of contacts 3, 4, 10, 16, 32 (2x 16) + PE
Electrical data acc. to EN 61 984
Han ® 3 A / Han ® 4 A 10 A 230/400 V 4 kV 3
Rated current 10 A
Rated voltage conductor - ground 230 V
Rated voltage conductor - conductor 400 V
Rated impulse voltage 4 kV
Pollution degree 3
or 10 A 250 V 4 kV 3
Han ® 10 A / Han ® 16 A 16 A 250 V 4 kV 3
Rated current 16 A
Rated voltage 250 V
Rated impulse voltage 4 kV
Pollution degree 3
Pollution degree 2 also 16 A 230/400 V 4 kV 2
Rated voltage
acc. to UL/CSA 600 V
Insulation resistance ≥ 10 10 Ω
Material polycarbonate
Limiting temperatures -40 °C ... +125 °C
Flammability acc. to UL 94 V 0
Mechanical working life
- mating cycles ≥ 500
Contacts
Material copper alloy
Surface - hard-gold plated 2 µm Au over 3 µm Ni
Surface - hard-silver plated 3 µm Ag
Contact resistance ≤ 1 mΩ
Crimp terminal - min 0,14 mm² / AWG 26
Crimp terminal - max 4 mm² / AWG 12
Screw terminal - min 0.75 mm² / AWG 18
Screw terminal - max
Han ® 3 A / 4 A 1.5 mm² / AWG 14
Han ® 10 A / 16 A 2.5 mm² / AWG 14
Tightening/test torque 0,25 Nm Han ® 3 A / 4 A
0,5 Nm Han ® 10 A / 16 A
Termination Han-Quick Lock ®
blue slide
Terminal wire gauge
0.5 ... 2.5 mm 2
(AWG 20 - 14)
max. Insulation diameter 3.6 mm
black slide
Terminal wire gauge
0.25 ... 1.5 mm 2
(AWG 23 - 16)
max. Insulation diameter 3.0 mm
Hoods/Housings, thermoplastic Han ® 3 A / Han ® 4 A
Material polycarbonate RAL 7032
Locking element Polyamide RAL 7032
Flammability acc. to UL 94 V 0
Hoods/Housings seal NBR
Limiting temperatures -40 °C ... +125 °C
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 65 / IP 67
Hoods/Housings, metal
Material Han ® 3 A / 4 A zinc die-cast
Material Han ® 10 A / 16 A aluminium die-cast
Locking element
Han ® 3 A / 4 A steel, zinc-plated
Han ® 10 A / 16 A Han-Easy Lock ®
Hoods/Housings seal NBR
Limiting temperatures -40 °C ... +125 °C
Degree of protection acc. to DIN EN 60 529
for coupled connector
Han ® 3 A / 4 A IP 44
IP 67 is achieved with seal
screw
"https://b2b.harting.com/ebusiness/en/
09 20 000 9918
" Han ® 10 A / 16 A IP 65
Further selection of hoods/housings see chapter 31
Accessories
Crimping tools chapter 99
Cable clamps chapter 95
Sealing screw chapter 95
Coding of hoods/housings chapter 95
Label acc. to CSA-approval chapter 95
Assembly plates
for test connector chapter 95